|
 |
Code No.: Hot Melt Glue
Type:
Payment Term: 50% T/T in Advance or 100% L/C at Sight
Lead Time: 15 to 25 days after confirming everything.
|
Specification:
| Hot Melt Glue Technical Data |
| Composition |
|
| Solid Content |
100% |
| Toxicity |
None |
| Color |
Molten Gardner Color |
R&B Softening Point |
80+-3oC |
| Brookfield Viscosity |
135oC----------5050 CPS |
| 150oC----------2700 CPS |
| 165oC----------1475 CPS |
| 180oC----------900 CPS |
Product Form |
Cake |
| Shelf Life |
>One year |
Recommended Aplication Temperature |
135~160oC |
| |
|
| Clean up Instructions:Consult the equipment manufacture for cleanup procedures: Do not exceed a flush temperature of 150oC. After cleanup, flush the applicator thoroughly with hot melt adhesive to purge the system. |
| Safety Insructions: To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize risk of flammable vapors, do not exceed a melt temperature above 200oC. Prevent the buildup of vapor. Extinguish all source of ignition during hot melt use. |
| Others:The information contained in this bulletin we believe is correct to the best of our knowledge and tests. The recommendations and suggestions herein are made without guarantee or representation as to results. We recommend that adequate tests be made in your laboratory or plant to determine if this product meets all of your requirement. |
| |
Application: |
Construction Glue for Napkins & Diapers |
|
|
Hot Melt Glue Technical Data |
| Composition |
|
| Solid Content |
100% |
| Toxicity |
None |
| Color |
Molten Gardner Color |
R&B Softening Point |
78+-3oC |
| Brookfield Viscosity |
135oC----------5300 CPS |
| 150oC----------2700 CPS |
| 165oC----------1500 CPS |
| 180oC----------1000 CPS |
Product Form |
Pillow |
| Shelf Life |
One year |
Recommended Aplication Temperature |
135~165oC |
|
| Clean up Instructions:Consult the equipment manufacture for cleanup procedures: Do not exceed a flush temperature of 150oC. After cleanup, flush the applicator thoroughly with hot melt adhesive to purge the system. |
| Safety Insructions:To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize risk of flammable vapors, do not exceed a melt temperature above 200oC. Prevent the buildup of vapor. Extinguish all source of ignition during hot melt use. |
| Others: The information contained in this bulletin we believe is correct to the best of our knowledge and tests. The recommendations and suggestions herein are made without guarantee or representation as to results. We recommend that adequate tests be made in your laboratory or plant to determine if this product meets all of your requirement. |
| |
Application: |
Positioning Glue for Napkins |
|
|
Packing:
|
|
|
